The main configuration parameters of SD-H2100 flame compound machine

Custom flame compound machine, flame machine, sponge compound machine, automobile interior sponge compound machine

Equipment technical parameters:

Equipment characteristics:

SD-H2100 equipment control, humanized operation, easy maintenance, constant tension, high-precision fire exhaust device, easy to control the stability of the fire.

SD-H2100 device features:

SD-H2100 operation precautions:

Operators can only operate this equipment after they are fully familiar with the machine's performance and working principles. This equipment must be operated by a dedicated person, and non-operating personnel cannot open or move randomly.

Before production, check whether electrical appliances such as cables, circuit breakers, contactors, and motors meet the requirements.

Before production, check whether the three-phase power supply is balanced, and it is strictly forbidden to start the equipment without phase.

During the production period, check whether each rotary joint is safe, whether the pipeline is unblocked, whether there is any damage or oil leakage, and remove it in time.

Before production, check whether the pressure of each barometer is normal, whether there is any leakage in the gas path, and repair it in time

Before production, check the fastening of each connection to see if there is any looseness or falling off, and repair it in time.

Before mass production of the equipment, a small amount of test should be done first, and mass production can only be carried out after success.

Before production, check the lubrication conditions of various hydraulic stations, reducers, bearing bushes, lead screws, etc., and fill in hydraulic oil and lubricating oil in a correct and timely manner.

After the machine is stopped, the dust collection parts and other accessories must be applied in time, and the rubber roller must be used to remove the residual material and dirt of each part of the machine for the next use.

It is strictly forbidden to contact corrosive liquids with the rubber rollers, and always ensure that the surface of each drive roller is clean and free of foreign matter.

It is strictly forbidden to pile up debris around the host system, and keep the host clean and free of foreign objects at all times. Ensure a certain heat dissipation effect.

SD-H2100 maintenance and maintenance:

The lubricating oil of the reducer should be changed every six months. ·

The dust collection device is regularly checked and replaced according to the actual production situation.

The hydraulic oil tank should be replaced with N46 or N32 anti-wear hydraulic oil every six months.

Check the hydraulic oil tank, the oil tank of the hot oil machine once a month, remove the grease, remove the impurities, and add enough lubricating oil and heat transfer oil

Lubricating oil should be added to the bearings and screws every shift.

After each shutdown, accessories such as dust collection parts and anilox rollers must be removed in time to remove residual materials and dirt from all parts of the machine.

The chain should be checked every shift to ensure normal lubrication and timely tensioning.

Check the connecting parts every shift, and whether the fasteners are loose or missing, and fasten them in time.

Check the oil pumps, cylinders, solenoid valves, distribution valves, oil pipes and other connections for oil leakage every shift.